DS200DSFBG1ACB Mark V Speedtronic系列中PCB

DS200DSFBG1ACB  Mark V Speedtronic系列中PCB

产品描述

DS200DSFBG1ACB是通用电气设计的驱动器分流反馈板，用于Mark V系统。这包括驱动器和激励器。分流反馈卡用于控制电流。

DS200DSFBG1ACB是一个大而近方形的电路板。虽然未安装加劲肋，但其安装标记位于四个板边缘中的两个。这些金属棒有助于增加电路板和焊点的刚度，以及振动和冲击损坏的痕迹。

DS200DSFBG1ACB在每个角落都有钻孔，以提供安装选项。两个板边缘标有对齐点，板子上标有GE标志。该板在板体内有十多个孔眼。它们用导电材料环绕，将用于连接设备栅极和发射器。其他电路板元件包括晶体管、变压器、电阻网络阵列、压敏电阻和电阻器。DS200DSFBG1ACB板还具有集成电路、LED 指示灯以及垂直引脚和卡入式连接器。此特定主板上没有可配置的硬件。

The DS200DSFBG1ACB is a driver shunt feedback board designed by General Electric for use in the Mark V system. This includes drivers and actuators. The shunt feedback card is used to control the current.
The DS200DSFBG1ACB is a large and nearly square circuit board. Although stiffeners are not installed, their installation markings are located on two of the four plate edges. These metal rods help increase the stiffness of circuit boards and solder joints, as well as the signs of vibration and impact damage.
The DS200DSFBG1ACB has drilled holes in each corner to provide installation options. The edges of the two boards are marked with alignment points, and the board is marked with the GE logo. The plate has more than ten holes in the plate body. They are surrounded by conductive materials and will be used to connect the device gate and emitter. Other circuit board components include transistors, transformers, resistor network arrays, varistors, and resistors. The DS200DSFBG1ACB board also features integrated circuits, LED indicators, vertical pins, and snap in connectors. There is no configurable hardware on this specific motherboard.








联系我们
厦门雄霸电子商务有限公司
厦门市思明区吕岭路1733号创想中心2009-2010单元
联系人：阿清
电话： 15359317083
电子邮件： 3433465711@qq.com 
QQ：3433465711

厦门雄霸电子商务有限公司提供周到的服务和完整的零件    
    
（1）在24小时内及时回复您;    
    
（2）100%质量保证，1年保修;    
    
（3）很好的服务，合理的价格;    
    
（4）已行至多年，有良好的信誉;    
    
（5）我们将在付款后3个工作日内发货;    
    
（6）所有货物在装运前都要经过检测;    
    
（7）包装在专业防静电袋中;    
    
（8）我们可以通过DHL / UPS / EMS / 联邦快递运送给您...请直接与我们联系，我们将根据您的要求发货。
 

更多库存：