DS200DSFBG1ADB GE Mark V 速度电子驱动器/分流器退款板

DS200DSFBG1ADB GE Mark V 速度电子驱动器/分流器退款板

产品描述

DS200DSFBG1ADB电路板设计为GE的Mark V Speedtronic涡轮控制系统的一部分。 该系统已用于工业涡轮机（燃气和蒸汽）的控制和管理数十年。其他Speedtronic系统，如Mark I，Mark II和Mark IV已经存在了更长的时间。同时，Mark VI和Mark VIe提供了更先进的控制选项。DS200DSFBG1ADB用作驱动器和并联反馈板。它只安装了几个组件。板本身几乎是完全方形的;但是，标记了两个板边缘，以便安装板加劲肋。这些安装指南将帮助您正确定位。除非首先正确安装了电路板加强筋，否则不应在振动和冲击可能很大的位置使用电路板。它们保护焊点和走线。

DS200DSFBG1ADB仅填充少。元件包括电阻网络阵列、二极管、变压器、晶体管和金属膜电阻器。此外，DS200DSFBG1ADB板具有卡入式连接器和插头连接器，以允许与其他板互连。 LED指示灯和集成电路也安装在板上。多个工厂钻孔用导电材料环住，并标有三个字母的代码。板角也钻孔用于安装。

The DS200DSFBG1ADB circuit board is designed as part of GE's Mark V Speedtronic turbine control system. This system has been used for decades for the control and management of industrial turbines (gas and steam). Other Speedtronic systems, such as Mark I, Mark II, and Mark IV, have existed for a longer time. At the same time, Mark VI and Mark VIe offer more advanced control options. The DS200DSFBG1ADB serves as a driver and parallel feedback board. It only installs a few components. The board itself is almost completely square; However, both plate edges are marked for installation of plate stiffeners. These installation guides will help you locate correctly. Circuit boards should not be used in locations where vibration and shock can be significant unless the circuit board stiffeners are installed correctly first. They protect solder joints and wiring.

DS200DSFBG1ADB only has a small population. Elements include resistor network arrays, diodes, transformers, transistors, and metal film resistors. In addition, the DS200DSFBG1ADB board has snap in connectors and plug connectors to allow interconnection with other boards. LED indicators and integrated circuits are also installed on the board. Several factory drilled holes are ringed with conductive material and marked with a three letter code. Plate corners are also drilled for installation.







联系我们
厦门雄霸电子商务有限公司
厦门市思明区吕岭路1733号创想中心2009-2010单元
联系人：阿清
电话： 15359317083
电子邮件： 3433465711@qq.com 
QQ：3433465711

厦门雄霸电子商务有限公司提供周到的服务和完整的零件    
    
（1）在24小时内及时回复您;    
    
（2）100%质量保证，1年保修;    
    
（3）很好的服务，合理的价格;    
    
（4）已行至多年，有良好的信誉;    
    
（5）我们将在付款后3个工作日内发货;    
    
（6）所有货物在装运前都要经过检测;    
    
（7）包装在专业防静电袋中;    
    
（8）我们可以通过DHL / UPS / EMS / 联邦快递运送给您...请直接与我们联系，我们将根据您的要求发货。
 

更多库存：