DS200DSFBG1AEB GE Mark V Speedtronic系列 用作驱动器/分流反馈板

DS200DSFBG1AEB GE Mark V Speedtronic系列  用作驱动器/分流反馈板

产品描述

DS200DSFBG1AEB是GE Mark V板元件，在励磁器和驱动器中用作驱动器/分流反馈板。这些板用于控制电流。Mark V是通用电气从1960年代开始发布的几个Speedtronic系统之一。该系统提供内置诊断和在线维护。

DS200DSFBG1AEB表面只安装了少量元件。这些组件都不是用户可配置的。该板标有添加两个板加强筋的标记。如果您打算在可能受到振动或冲击的区域使用电路板， 您可能需要考虑添加这些加强组件以保护焊点和走线.DS200DSFBG1AEB已在工厂的每个角落钻孔。这些小孔允许安装选项。此外，还有十二个较大的孔眼钻穿板体。这些较大的孔用一种导电材料环绕，用于设备栅极或发射器的连接器。

DS200DSFBG1AEB包含陶瓷电容器、金属膜电阻器、电阻网络阵列、晶体管、二极管和变压器等组件。该板还具有插头连接器和卡入式连接器，以及压敏电阻和 LED 指示灯。

The DS200DSFBG1AEB is a GE Mark V board component that serves as a driver/shunt feedback board in exciters and drives. These boards are used to control the current. Mark V is one of several Speedtronic systems released by General Electric since the 1960s. The system provides built-in diagnostics and online maintenance.
The DS200DSFBG1AEB only has a small number of components installed on its surface. None of these components are user configurable. The plate is marked with the addition of two plate stiffeners. If you plan to use circuit boards in areas that may be subject to vibration or shock, you may need to consider adding these reinforcement components to protect solder joints and wiring. The DS200DSFBG1AEB has been drilled in every corner of the factory. These small holes allow installation options. In addition, there are twelve larger holes drilled through the plate body. These larger holes are surrounded by a conductive material and are used for equipment gate or transmitter connectors.

The DS200DSFBG1AEB includes components such as ceramic capacitors, metal film resistors, resistor network arrays, transistors, diodes, and transformers. The board also has plug connectors and snap in connectors, as well as varistors and LED indicators.







联系我们
厦门雄霸电子商务有限公司
厦门市思明区吕岭路1733号创想中心2009-2010单元
联系人：阿清
电话： 15359317083
电子邮件： 3433465711@qq.com 
QQ：3433465711

厦门雄霸电子商务有限公司提供周到的服务和完整的零件    
    
（1）在24小时内及时回复您;    
    
（2）100%质量保证，1年保修;    
    
（3）很好的服务，合理的价格;    
    
（4）已行至多年，有良好的信誉;    
    
（5）我们将在付款后3个工作日内发货;    
    
（6）所有货物在装运前都要经过检测;    
    
（7）包装在专业防静电袋中;    
    
（8）我们可以通过DHL / UPS / EMS / 联邦快递运送给您...请直接与我们联系，我们将根据您的要求发货。
 

更多库存：