DS200DMCBG1A GE DOS DUP 处理器板 DS200DMCBG1A

DS200DMCBG1A GE DOS DUP 处理器板 DS200DMCBG1A

DS200DMCBG1A 技术指标

产品描述

GE DOS DUP 处理器板 DS200DMCBG1A 包含 3 个 26 针连接器、一个 40 针连接器和 19 个跳线。该板还有 2 个 LED。GE DOS DUP 处理器板 DS200DMCBG1A 还装有复位按钮，使合格的服务人员无需重新启动驱动器即可重新启动电路板的操作。如果主板似乎出现间歇性问题或行为异常，则故障排除过程的步是打开主板机柜，找到电路板，然后按重置按钮。按住重置按钮三秒钟，然后松开按钮。这使电路板能够清除所有信号并重新启动正常操作。

DS200DMCBG1A主板的另一个故障排除功能是电路板上的两个 LED。LED 呈红色，在电路板上标识为 CR1 和 CR12。LED 一起位于电路板的一角。如果问题似乎源于电路板，您可以快速查看 LED，原始电路板附带的信息将提供 LED 点亮时指示的内容的描述。

另一个简单的故障排除步骤是检查板上的两个保险丝。如果DS200DMCBG1A电路板已停止工作或某些功能已停止工作，您可以快速查看板上的保险丝并判断保险丝是否熔断。仅用具有相同额定值的保险丝更换熔断的保险丝非常重要。

The GE DOS DUP processor board DS200DMCBG1A contains three 26 pin connectors, one 40 pin connector, and 19 jumper cables. The board also has 2 LEDs. The GE DOS DUP processor board DS200DMCBG1A is also equipped with a reset button, enabling qualified service personnel to restart the operation of the circuit board without restarting the driver. If the motherboard appears to have intermittent problems or abnormal behavior, the first step in the troubleshooting process is to open the motherboard cabinet, locate the circuit board, and then press the reset button. Press and hold the reset button for three seconds, then release the button. This allows the circuit board to clear all signals and restart normal operation.

Another troubleshooting feature of the DS200DMCBG1A motherboard is the two LEDs on the circuit board. The LED is red and identified as CR1 and CR12 on the circuit board. The LEDs are located together in a corner of the circuit board. If the problem seems to originate from a circuit board, you can quickly view the LEDs, and the information provided with the original circuit board will provide a description of what was indicated when the LEDs were lit.
Another simple troubleshooting step is to check the two fuses on the board. If the DS200DMCBG1A circuit board has stopped working or some functions have stopped working, you can quickly check the fuses on the board and determine whether the fuses are blown. It is important to replace a blown fuse only with a fuse of the same rating.