DS200AAHAH1A DS200AAHAH1ADC 弧网集线器局域网驱动板 EX2000

DS200AAHAH1ADC 技术指标

产品描述

DS200AAHAH1ADC是ARCNET连接PCB。它初由GE生产和销售，作为Speedtronic系列的Mark V LM系列组件的一部分。

DS200AAHAH1ADC通常称为AAHA板。它通常充当 <R> 控制引擎的不同 I/O 内核或外部模块之间的接口单元。它使这些接口单元能够访问ARCNET。通常有两个AAHA板与<R>内核一起使用。个 AAHA 板充当用户界面和 <R> 内核之间的连接。AAHA 上有一个 APL 连接器，将其链接到 UCIA 板上 <R> 内核中的 UCPB 子板。第二个 AAHA 板充当将 <R> 内核连接到 COREBUS 的一种方式。它支持I/O内核与<R>内核中的<R>控制引擎之间的主动通信。此 AAHA 上的 APL 连接连接到 PANA 子板。

DS200AAHAH1ADC是一款非常小的子板，顶部共有三个通信端口。左侧的端口是不常用的 EBNC 端口。EBNC旁边是ARCBNC-B和ARCBNC-A端口。这两个端口是与 ARCNET 的连接。在电路板的底部是三个引脚连接器。个引脚连接器是 2 针 2PL 插孔。底部边缘的中心是 10 针 APL 插孔。APL 旁边是一个 9 针 EPL 插孔，也不经常使用。


DS200AAHAH1ADC is an ARCNET connection PCB. It was originally produced and sold by GE as part of the Mark V LM series components of the Speedtronic series.
The DS200AAHAH1ADC is commonly referred to as an AAHA board. It typically acts as an interface unit between different I/O cores or external modules of the<R>control engine. It enables these interface units to access ARCNET. Typically, there are two AAHA boards used with the<R>kernel. The first AAHA board serves as a connection between the user interface and the<R>kernel. There is an APL connector on AAHA that links it to the UCPB sub board in the<R>kernel on the UCIA board. The second AAHA board serves as a way to connect the<R>kernel to COREBUS. It supports active communication between the I/O kernel and the<R>control engine in the<R>kernel. The APL connection on this AAHA is connected to the PANA daughter board.

The DS200AAHAH1ADC is a very small sub board with three communication ports on the top. The leftmost port is an uncommon EBNC port. Next to the EBNC are the ARCBNC-B and ARCBNC-A ports. These two ports are connected to ARCNET. At the bottom of the circuit board are three pin connectors. The first pin connector is a 2-pin 2PL jack. The center of the bottom edge is a 10-pin APL jack. Next to the APL is a 9-pin EPL jack, which is not often used.